Directions for use
● This pump unit requires a separate control circuit to operate.
● Do not remove the oil fill strainer in order to keep the pump
clear of foregn matter.
● Replace the suction filter at least once a year.
● Oil viscosity varies with oil temperature. Be sure to use oil within
the working viscosity range.
● Do not use any special additive-contained oil, water soluble oil,
or solvent.
● Periodically check the oil in the reservoir for impurities.
Replace it, if necessary, with fresh oil immediately.
Be sure to clean the reservoir before replacing oil.
● Make sure that proper voltage is applied.
● Do not over tighten the discharge joint.
● Low-oil viscosity versions are available. Contact us for information.